Simpson Strong Tie LTT Light Tension Tie Holdown with Nails

The LTT is a solution for resisting tension loads that are fastened with nails. This light tension tie has a built-in load transfer plate washer for increased performance. The LTT is designed for horizontal purlin applications and may also be used for vertical holdown applications.

Key Features

  • Nailing patterns to accommodate different purlin/rafter/truss types
  • Low-profile seat to reduce visibility of tie
  • Tested with different anchor bolt diameters to meet code-required applications based on substrate

Material

  • See table

Finish

  • Galvanized. May be ordered HDG; contact Simpson Strong-Tie.

Installation

  • See Holdown and Tension Tie General Notes.
  • A standard-cut washer is required for LTT19 and LTT20B when using 1/2″ or 5/8″ anchor bolts. No additional washer is required when using a 3/4″ anchor bolt.
  • For information about marriage strap at panelized roof applications, see MSTD.
  • The LTT19 light tension tie is designed for 2x joists or purlins.
  • The LTT20B is for nail- or bolt-on applications. The 3″ nail spacing makes the LTT20B suitable for wood I-joists using 0.148″ x 1 1/2″ nails.
  • The LTTI31 is designed for wood-chord open-web truss attachments to concrete or masonry walls and may also be installed vertically on a minimum 2×6 stud.

ImageModel No.PriceQuantityAdd to CartWishlist ***
Model No.: LTT19Price: $16.02
Model No.: LTT20BPrice: $20.83
Model No.: LTTI31Price: $72.79

Share on facebook
Share on email
Share on print

Choice Billing Address

×

Choice Billing Address

×