Simpson Strong Tie HGUS Heavy Girder Hanger with Double-Shear Nailing

The HGUS is an extra-heavy-capacity hanger for applications requiring girder support. This girder hanger features double-shear nailing that distributes the load through two points on each joist nail for greater strength. Value-engineered, the HGUS is designed to carry high loads for an economical price.

Key Features

  • Can be installed after the beam is secured in place
  • HGUS-series hangers are tested, load rated and code compliant

Material

  • 12 ga.

Finish

  • Galvanized

Installation

  • Use all specified fasteners; see General Notes.
  • Joist nails must be driven at an angle through the joist or truss into the header to achieve the table loads.
  • Not designed for welded or nailer applications.
  • Do not use double-shear hangers with I-joists.
  • 0.148″ x 3 1/4″ nails may be used where 0.148″ x 3″ nails are specified, with no reduction in load. Where 0.162″ x 3 1/2″ nails are specified, 0.148″ x 3″ or 0.148″ x 3 1/4″ nails may be used at 0.85 of the table load.
  • With 3x header members, use 0.162″ x 2 1/2″ (Simpson Strong-Tie® N16) nails in the header and 0.162″ x 3 1/2″ nails in the joist with no load reduction. With 2x header members, use 0.148″ x 1 1/2″ nails in the header and 0.148″ x 3″ nails in the joist, and reduce the load to 0.64 of the table value.

ImageModel No.PriceQuantityAdd to CartWishlist ***
Model No.: HGUS26Price: $20.33
Model No.: HGUS26-2Price: $23.43
Model No.: HGUS26-3Price: $30.18
Model No.: HGUS26-4Price: $42.42
Model No.: HGUS28Price: $28.27
Model No.: HGUS28-2Price: $26.71
Model No.: HGUS28-3Price: $36.87
Model No.: HGUS210-2Price: $39.76
Model No.: HGUS210-3Price: $50.11
Model No.: HGUS210-4Price: $70.62
Model No.: HGUS410Price: $45.50
Model No.: HGUS412Price: $49.98
Model No.: HGUS414Price: $58.75
Model No.: HGUS5.50/10Price: $62.32
Model No.: HGUS5.50/14Price: $84.12

Share on facebook
Share on email
Share on print

Choice Billing Address

×

Choice Billing Address

×